高清不卡亚洲日韩av在线,欧美国产SE综合,欧美日韩亚洲乱国产综合AⅤ,极品尤物喷水超多嫩白视频

What are the problems facing machine

1 fitting precision and the paper itself: This is also linked to, but the main problem is still the problem of mechanical structure. The new machine or repair, a period of time there will be fit accuracy is not normal.

This problem is mainly has the following A: positioning chain wear (elongated).B positioning claw (refers to wear in the base of chain drive sprocket).C positioning claw is worn.

Of course, there are other factors such as: operation caused by abrasion, glue wheel bearings wear ¸ four wheel set gear gap is too large and so on. All of these bring the operating personnel and the back section of the die-cutting troubled sector.

2 degumming and with flowers: glue more on the fly glue and then with flowers, glue less degumming. It is divided into two aspects: the nature and the concentration of glue, the glue wheel and wear scraping wheel or turbine with the wheel balance gap cleaning, then is the bearing or shaft head wear caused by.

3 Feida paper out: this situation with two or more pieces of paper, this problem is more vacuum help worn cause insufficient blowing pressure and flow.

4 corrugated paper: this situation to tape wear thin, reduce friction force, high pressure blower power is insufficient and so on.

Automatic water laminating machine technical parameters

Resin coated machine type QZFM-1000 QZFM-1200

The biggest film format 900X1000 1050X1200

The minimum film format 406X340 06X340

Suitable paper specifications 100-400g/ square meters 100-400g/ square meters

Resin coated machine speed 0-60m/min 0-60m/min

Resin coated machine power source 380V/50Hz 380V/50Hz

The total power of laminating machine 7.6Kw 7.6Kw

The outer shape size 3655X1500X1630mm 3655X1700X1630mm

Resin coated machine weight 1.8T 2.0T